Time Machine is such an incredibly useful tool and so easy to use that everyone should be using it to back up their Mac. Fission 2 5 0 1. Not only will it bail you out if the worst happens and you need to delete your boot drive reinstall macOS from scratch, but it allows to to recover individual files that you may have accidentally deleted or modified.
In this article, we’ll show you a couple of ways to delete Time Machine backups when you need to free up space. But before we do, it’s worth recapping how Time Machine works so we know what we’re going to delete.
Time Machine backs up everything on your Mac by default. However, when you set it up, you can specify folders, such as, say, your Downloads folder, to omit from the backup. You can also specify where the backup should be stored. When Apple launched Time Machine, it also launched a network storage system called Time Capsule to make it easy for MacBook users to back up wirelessly. And makers of network attached storage devices added support to those for Time Machine. However, Apple no longer sells the Time Capsule and recommends only directly attached storage drives for use with Time Machine. So the chances are, you’ll be backing up to a USB hard drive or SSD.
Mount them through Disk Utility and you will see them in Finder where you can just unmount them by clicking on the eject icon in the sidebar next to their names (in Finder) and they will disappear. The Disk image size section contains a slider that allows you to change the maximum size of the disk image. Adjust the slider to set a lower limit. Click Apply & Restart. When you reduce the maximum size, the current disk image file is deleted, and therefore, all containers and images will be lost.
The first time Time Machine backs up your Mac, it copies everything, except the folders you’ve excluded, to the backup drive and saves it as a sparse disk image. After that, it backs up your Mac every hour, copying only those files that have changed since the last backup. It keeps every hourly backup for 24 hours, then one backup per day for the previous month, and one backup per week from every month before that.
As you can see, once you’ve been using Time Machine for a while, the size of the backup will grow. When you start to run short of space, Time Machine will ask you if you want to delete backups. However, you may want to free up space before then, here’s how to do that.
https://softbusters.mystrikingly.com/blog/how-to-create-a-txt-file-in-mac. Note: If you want to free up space on your Time Machine disk so that you can use it to store other data, don’t. It’s good practice to have one dedicated disk for Time Machine. If you use the disk for other things, you increase the chance of it failing. And if that happens, you’ve lost your backup.
Here’s how to delete Time Machine backups from an external hard drive using the Time Machine app itself. You can use the same method to remove them from a network drive.
1. Make sure your backup drive is connected to your Mac.
2. Launch Time Machine from the Finder menu bar.
3. Navigate to either Macintosh HD (or whatever you’ve re-named it) or to your user Home folder and scroll back to the point in time where you want to start deleting backups (Tip: you can use the arrows to the right of the Finder window or two fingers on your trackpad to scroll through backups).
4. Once you’ve located the most recent backup you want to delete, right-click on the Finder window, or click the gear icon in the Finder window toolbar.
5. Choose “Delete all backups of…” from the menu.
6. Type in your admin username and password. Adobe print shop for mac.
7. Once Time Machine has deleted the backups, manually start a new backup.
There is another way to manually delete Time Machine backups, using Terminal and the tmutil command. It should only be used if you’re comfortable with a command line interface. If not, use the method above. As with all Terminal sessions, you should back up all your data immediately before you start and makes sure you follow the instructions carefully, typing the commands exactly as they appear.
1. Launch Terminal from Applications > Utilities.
2. To see a list of all backups, type: tmutil listbackup.
3. You will now see a list of all the backups made by Time Machine, listed by date.
4. Locate the backup you want to delete and type: sudo tmutil delete followed by the path to the backup as displayed in when you used the listbackup command. So, for example: /Volumes/KennyTimeMachine/Backups.backupdb/MacintoshHD/YYYY-MM-DD-HHMMSS/ — where ‘KennyTimeMachine’ is the name of your Time Machine backup volume, ‘MacintoshHD’ is the name of your Mac, and ‘YYY-MM-DD’ is the date of the backup
If you’re comfortable using wildcards in Terminal, you can specify multiple backups to delete at once.
In addition to deleting Time Machine backups, you may need to delete snapshots sometime. Snapshots are created whenever Time Machine wants to run a backup but can’t connect to the backup drive. The snapshot is saved on your boot drive, until Time Machine can connect to the backup drive again. The snapshot files should be managed automatically and deleted when they are no longer needed. Case 695 sr service manual. For example, Apple says they are deleted once you connect to your backup drive or, if that doesn’t happen, once they reach a certain age. Ot also doesn’t create snapshots if it would cause a drive to have less than 20% spare capacity.
But there have been cases where Mac users have noticed that this hasn’t happened and the snapshots are occupying tens of gigabytes of space on their drive. Control end on mac. So, here’s how to delete snapshots manually, again using Terminal and tmutil
1. Launch Terminal
2. Type: tmutil listlocalsnapshots /
You will see a list of snapshots with names like “com.apple.TimeMachine.2018-12-15-002010”
3. To delete a specific snapshot, type, or copy and paste: sudo tmutil deletelocalsnapshots then the date of the snapshot you want to delete, so that it looks like this: tmutil deletelocalsnapshots 2018-12-15-002010
4. You should see: Delete local snapshot '2018-12-15-002010' in the Terminal window. This means the snapshot has been successfully deleted. You will need to repeat step 3 for every snapshot you want to delete, changing the date portion of the command each time.
5. If you want to prevent Time Machine from making local snapshots altogether, type: sudo tmutil disablelocal
If the methods of deleting Time Machine snapshots seem complicated, you’re in luck. CleanMyMac X has a tool that will do it for you in a few clicks.
That’s it! Once you reduce the size of your Time Machine backups, try out other tools in CleanMyMac X to clean, speed up, and protect your Mac.
Whether you want to delete a complete set of Time Machine backups, or just local snapshots, there are a number of ways to do it. The most complex, but also the one that gives you the most control, is to use tmutil in Terminal. As always, take great care when you use Terminal. You can also delete backups, though not snapshots, using Time Machine itself. The easiest way of all, however, is to use the Time Machine tool in CleanMyMac X. And while you’re there, you can use other tools in the System Junk utility to free up more space.
Most users use Disk Utility to erase a disk or hard drive. But some Mac users might need to erase them from the command line on Mac OS. To do that, the only thing you need is a bit of precise syntax to make sure that you are erasing the proper disk.
Here I'll show you how you can erase and format a disk using the command line.
Start off by running the following command in the command line: Diskutil list
Free tuner plugin mac. This is going to list all the mounted drives on your Mac.
Once you have found the proper drive to erase, just copy its identifier so you can use it for the next command. Then pick a name and a system format type. This is the syntax we need: Diskutil eraseDisk FILESYSTEM DISKNAME DISKIDENTIFIER
Let’s say the disk I want to erase has “/dev/disk5s2” as its identifier and I’m going to use Mac OS Extended Journaled (JHFS+) as the system format type and name it “Empty”. The syntax is going to look like this: Diskutil eraseDisk JHFS+ Empty /dev/disk5s2
It’s important to keep in mind that if you run the eraseDisk command, the target disk is going to lose all its data, so make sure you are erasing the proper disk.
If you need different system format types, here are a few references you could use instead of JHFS+:
0 
Star